Expert help

Jargon buster

Below is a breakdown of some common terms and phrases used in schools, including maths vocabulary in our Maths jargon buster.

Education jargon buster

For phrases you might hear your child's teacher mention.

baseline test
Many schools already carry out a short test on entry to Reception, but it is compulsory from September 2016. Children are tested in the core areas of literacy and numeracy so that they can be supported to reach their goals by the end of the year. The test information will be used alongside a wide range of other activities such as home visits, observations of children and reports to create a helpful and accurate picture of your child’s potential and progress in terms of ‘expected’, ‘emerging’ or ‘exceeding’.

EYFS
The Early Years Foundation Stage sets standards for the learning, development and care of children from birth to 5 years old.

financial education
An emphasis on numeracy skills, using money and working with percentages.

OFSTED
The Office for Standards in Education, Children’s Services and Skills and is the organisation appointed by the government to inspect schools in England.

SATs
SATs stands for Standard Assessment Tasks. These are national tests in reading, grammar, punctuation and spelling and maths taken in May/June by children in their final year of primary school in England, Wales and Northern Ireland. There is a teacher assessment of maths, reading, writing, and science.

Maths language jargon buster

For extra definitions of maths vocabulary, such as the names of 2D and 3D shapes, you might find a primary maths dictionary handy.

array
Shapes or objects arranged in a rectangle are called an array. Egg boxes or muffin trays are good examples of arrays. Teachers use these to help children to 'see' multiplication. For example, 4 rows of muffins in a tray times 3, equals 12 muffins.

averages:
When we talk about averages in everyday life, we are usually referring to the mean average. This is the sum of the numbers in a set of data, divided by the number of members of that set. So if we wanted to know the average age of a group of children, we would add up all their ages and divide by the number of children.
There are two other types of average that children may come across in maths.
They are:
median average: The number in the middle if you place the numbers in a set in order
of size.
mode average: The most common number in a set (if any of the numbers occur more
than once).

chunking
Chunking is sometimes used as a way of estimating or checking division calculations. Using multiples of the number that the total has to be divided by breaks down the calculation into sizeable ‘chunks’ that are subtracted from the total. A first step in a calculation such as 615 ÷ 20 could involve subtracting ‘chunks’ of multiples of 20, one step at a time. For example, 615 – 200 – 200 – 200 = 15, so the answer to 615 ÷ 20 must be 30 (multiple 10 × 3 steps), plus a remainder.

data handling
This means using of simple lists, tables and graphs to present information.

factor pairs
Factor pairs are numbers that multiply together to make a particular number. For example, the numbers 5 and 8 are factor pairs of 40. You can multiply the factor pair, 5 and 8, together to get the larger number: 5 × 8 = 40. You can switch the order of the factor pair to equal the larger number, too. In maths, this is known as the commutative property of multiplication: 8 × 5 = 40 and 5 × 8 = 40. Similarly, you can divide the larger number by one of the factor pair to result in the other number: 40 ÷ 8 = 5.

formal written methods
Formal written methods are the standard procedures used for calculations that cannot easily be solved mentally. These include:

column addition and column subtraction: The process of writing numbers one above the other and then calculating each column in turn, beginning with the units column and working upwards in place value.

short multiplication and long multiplication: The process of multiplying two numbers by writing the numbers vertically, then multiplying the larger number by each digit of the smaller number, starting from the units column and then working upwards in place value. Short multiplication is suitable for multiplying a large number by a single-digit number, whereas long multiplication involves writing down the answers to each step, so is more useful for multiplying two large numbers.

short division and long division: The process of dividing a smaller number into a larger number, one digit at a time, starting on the left. This means working from the largest to the smallest place value, effectively rounding the final digits of the large number at each step. Short division involves ‘carrying’ numbers between place values, whereas long division involves writing down the answer to each step, so is more useful for dividing by larger numbers.

grid method
Schools sometimes use the grid method as a way of visualising multiplication, as part of formal calculations. For example, to work out 35 × 8 using the grid method, you set the numbers out in a grid:

Jargon Grid1

You then multiply the numbers and add them together to find the total:

Jargon Grid2

inverse operations
We say that addition and subtraction are inverse operations; this means that we can use one operation to 'undo' the other, e.g. you can undo adding 5 by taking away 5. Multiplication and division are also inverse operations. If you multiply a number by 10, you can undo this by dividing by 10.
Children are taught to use inverse operations to check their answers to a question. If they work out that 15 + 35 = 50, they might check this by subtracting 35 from 50 to see if they get 15.

number square
A number square is a visual image used in almost all classrooms to help children grasp the concept of number and place value.Jargon Numbersquare

number bonds
Number bonds are pairs which make up a total. The number bonds for seven, for example, are 3 + 4, 2 + 5, 1 + 6 and 0 + 7. Children will practise remembering these at schools. Help them practise at home.

number line
A number line is a visual image used in almost all classrooms to help children grasp the basic number relationships. Children will use a number line to count forwards and backwards, in, for example, 1s, 2s and 10s depending on the scale of the number line.

Jargon Numberline

measurements:
units of measure
A unit of measure is an agreed quantity by which we measure things. So, metres, centimetres, litres, millilitres, grams and kilograms are all units of measure.

metric measurement systems are systems for measuring things in which the units of measure go up in 10s or multiples of 10 (100, 1000 etc). For example kilometres, metres, centimetres and millimetres are the metric system for measuring length and distance: There are 10 millimetres in a centimetre, 100 centimetres in a metre and 1000 metres in a kilometre. We now use metric systems for most of our measuring.

imperial measurement systems are systems for measuring things that were developed in England in the 19th century. Examples are pounds and ounces for weighing and inches; yards and miles for measuring length and distance. We do not use them very much now, except miles for measuring distance and pints for volume.

converting between units of measure means changing a measurement from one unit (e.g. metres) to another unit (e.g. centimetres). So, the measurement 2 metres can be converted to 200 centimetres.

Length and distance are measured in kilometres, metres, centimetres and millimetres. There are:
10 millimetres in a centimetre.
100 centimetres in a metre.
1000 metres in a kilometre.

Mass is measured in grams and kilograms. There are:
1000 grams in a kilogram.

Volume is sometimes measured in litres and millilitres. There are:
1000 millilitres in a litre.

converting between imperial and metric systems of measure
It can be useful to be able to convert between some common Imperial systems of measurement and the comparable metric system, e.g. between miles and kilometres.
To do this, you need to know the relationship between them. Here are some common examples:
There are about 1.6 kilometres in a mile.
There are about 0.6 miles in a kilometre.

There are about 2 pints in a litre.
There are about 0.5 litres in a pint.

mental maths
Mental maths is essentially the ability to calculate mentally, i.e. in your head without writing anything down. Learning things such as number bonds, number patterns, doubles and multiplication tables facts are important mental maths skills.

missing number problems
A missing number problem is a calculation where one of the numbers has been taken out. The missing number could be represented by a space, question mark or shape, e.g.
4 + ___ = 9
Children have to use related number facts to work out the answer, for instance they may know that 9 – 4 = 5, and therefore deduce that 4 + 5 = 9. This type of question helps to prepare children for algebra, where unknown numbers are represented by letters.

one-to-one correspondence
This means being able to match one object to one other object or person. Children need to learn this in order to be able to count. This can be practised in a number of different play situations, such as laying the table, or setting out a tea party. For example, each person at the table needs 'one' cup.

order of operations
Mathematical operations include addition, subtraction, multiplication and division. The order of operations describes the order these should be carried out within a calculation: multiplication and division, then addition and subtraction, working from left to right.

partitioning
Partitioning a number means to expand the number. For example, 58 is partitioned into 50 and 8. It is often used to break down numbers when multiplying or dividing larger numbers to make the calculation easier. For example, 58 × 2 can be broken down into 50 × 2 = 100 and 8 × 2 = 16, giving an answer of 116.

place value
The value of a digit depends on its place within a number. This is its place value and it is the basis of our entire number system. For example, in 378 there are 8 units (or ones), 7 tens and 3 hundreds.

range
The range is the difference between the highest and lowest numbers in any given group of numbers, e.g. the age range of a group of children is the difference between the age of the oldest child and the age of the youngest child.

ratio
Ratios are a way of comparing the amounts of different things, e.g. if a recipe asks for flour and sugar in a ratio of 2:1, it means that you need 2 lots of flour for every 1 lot of sugar that you put in.

Each thing in a ratio needs to be measured in the same kind of unit. So, if a recipe asks for flour and sugar in a ratio of 2:1 and you put in 2 cups of flour, you need to put in 1 cup of sugar. If you put in 2 kilograms of flour, you need to put in 1 kilogram sugar and if you put in 2 bathtubs of flour, then you need to put in 1 bathtub of sugar!

You may also see ratios on map scales. In this case it tells you the relationship between the distance on the map and the distance in real life, e.g. 1:10,000 would mean that 1cm on the map represents an actual distance of 10,000cm.

sequence
A sequence is a set of things (usually numbers) that are in an order. Each number in the sequence is called a term. To find missing terms in a sequence, first you need to find the rule behind the sequence. For example, in the sequence '2 4 6 8' the rule is to add two to the previous number. The next number in the sequence would be '10'.

shape, space and measure
This term is used in curriculum documents and refers to work done with shapes, spatial awareness, (e.g. volume and area) and measurements (e.g. centimetres, metres, litres).

two-step problems
A word problem that requires two ‘steps’ in order to be solved is a two-step problem. For example, I have £6.50 to spend. If I buy two magazines priced at £1.95 each, how much money will I have left over? This requires two steps because we need to first add £1.95 and £1.95 to each other, and then take away this total from £6.50. In later years, children will encounter multi-step problems – that is, problems involving more than two steps.(See word problems)

using and applying mathematics
We use maths in everyday life, drawing upon our maths knowledge and applying it, for example to calculate how much wallpaper we need to buy when redecorating. This is known as 'using and applying' our maths skills in everyday life.

word problems
A word problem is a problem written in everyday language that requires maths to find the answer. Children will work with word problems frequently. For example, oranges cost 69p a kilo. I pay for a kilo of oranges with a £1 coin. How much change will I get?

Print this page

Help and advice